Pico Macom Agile CATV Demodulator, Sub-Band T7-T13 & 2-125
The MACOM D860 is a frequency agile professional re-broadcast grade, microprocessor controlled CATV demodulator. Its phase-locked loop frequency control, envelope signal detection and superior SAW filtering minimize adjacent channel interference and assure accurate and spurious-free performance. The unit accepts any NTSC television signal in the 5.75-806 MHz frequency range, converting it to baseband video and audio while maintaining over 60 dB S/N ratio. The sub-band capabilities allow the reception of remote channel origination for redistribution over the entire cable system, making it the ideal signal processor in government and institutional environments. A rear panel switch enables sub-band channel operation. IRC and HRC offsets can be activated via push-button switches on the front panel. The unit?s PLL circuitry in conjunction with the nonvolatile memory contained in the microprocessor ensures easy and reliable channel selection and restoration. The D860 provides three additional outputs: (a) an IF output to monitor tuner status and use in encoder, ghost canceling and video override applications, (b) a 4.5 MHz sub-carrier output, and (c) a broadband multiplex (MPX) output for high quality BTSC stereo pass-through. The D860 demodulator is shipped with all internal adjustments preset.
PVC-coated Products; PVC-coated Wires and Cables
WARNING: This product can expose you to chemicals including DINP and/or DEHP, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov or our information page: California Proposition 65.